Support & Training

Contact Support

TouchBistro is committed to responding to all support inquires. ​ For reporting inquiries or critical issues, please use the below form or email us at support@touchbistro.com.

Email Support

If you're in North America, you can reach us by phone at 888-342-0131. If you're in the UK, you can reach us by phone at 0800 051 3311 (Outside of North America +1-416-363-5252, Option 2). If you are experiencing a longer than normal wait time, please use the form above or email us at support@touchbistro.com and a representative will contact you.

stevie customer service16 st side

Support Department of the Year!

Barclaycard Set Up and Using V200c

Print

Chapter 1. Connecting your V200c

Section 1. Reserve an IP in Your AmpliFi Router

When you connect your V200c to your AmpliFi router, it gets assigned an IP address. There’s no guarantee this IP address will be the same from day-to-day. To prevent your AmpliFi router from assigning your V200c a new IP address, you need to tell your AmpliFi router to assign the same IP address to your V200c each time it connects. This is called Assigning a Static IP.

To do this, you first need to find your V200c’s 10/100 MAC address.

Look on the bottom of your device. Copy down the 10/100 MAC address on a piece of paper.

1. On your iPad, tap the AmpliFi app.

2. Tap on the picture of the AmpliFi Router on the start-up screen.

3. Scroll down to the Advanced section and tap DHCP Server.

4. Tap Static Leases.

5. Tap the Add + icon in the top right-hand corner to add a new reservation.

6. In the Name field, enter a name for this device (V200counter).

7. In the MAC Address field, enter the Wi-Fi MAC address you copied down from your V200c device. You will need to manually enter the : after every two alphanumeric couplets.

8. Tap IP Address and select an available IP address. For example, 10.0.1.220.

9. Tap the Checkmark in the top right-hand corner and tap Proceed when the Attention dialog box appears.

10. It may take your AmpliFi app a few minutes to reserve this IP. You may also lose your connection. Verify you iPad reconnects to your AmpliFi router’s TouchBistro network.

11. Your device now has a reserved IP in your AmpliFi router.

Chapter 2. Plugging in Your V200c

1. Plug the provided power cord into the power jack. Plug one end of your Cat5e Ethernet cable into Ethernet port. There are two ports that look like Ethernet ports. Only plug your Ethernet cable into the port market with the network symbol.

2. Plug the other end of the Ethernet cable into one of the LAN ports (they are numbered 1-4) on your AmpliFi router. The blue WAN port should be plugged into an Ethernet cable running to your Internet modem.

Chapter 3. Select LAN

1. After your V200c is powered up, access the Main Menu by pressing the Star key.

2. Press 3 on the keypad to select the Supervisor menu.

3. Enter your supervisor password. The default might be 12345. Press the green OK button.

4. Press 3 on the keypad to select the Communication menu.

5. Press the cursor control down to select Configuration. Press the green OK button.

6. Press the green OK button.

7. Press the green OK button.

to select LAN.

8. Press the cursor control down to select IPv4. Press the green OK button to select.

9. Ensure Enable IPv4 is set to Yes and DHCP is set to Yes. Press the red Cancel button to return.

10. Press the right-most function key to select Save.

11. Press the right-most function key to select OK.

12. Press the red Cancel button until you’re prompted to save the interface settings. Press the right-most function key to select Yes.

13. Press the right-most function key to select OK.

14. Return to the Communication Panel screen. If necessary use the cursor control to select Status. Press the green OK button.

15. If necessary use the cursor control to select LAN. Press the green OK button.

16. Verify the static IP address you programmed into your AmpliFi router is the same.

17. Press the red Cancel button until you return to the Main Menu.

Section 1. Configure POS Mode

Before you can use your V200c device with TouchBistro, you need to put it in POS mode. If it is not in POS mode, any transactions you process on the device won’t be reflected in TouchBistro.

1. From the Main Menu, press 4 on the PINpad to select Configuration.

2. Enter your supervisor password. The default might be 12345. Press the green OK button.

3. Press 2 on the PINpad to select POS.

4. Press 3 on the PINpad to select Enable/Disable POS.

5. Press the right-most function key to enable POS mode.

6. The Waiting for Merchant Login screen signifies you’re now in POS mode.

Chapter 4. Setting Up the V200c in TouchBistro

1. Tap Admin | Admin Setting.

2. Tap Payment Gateways and tap Barclaycard to select it.

3. Tap Setup.

4. Enter the Username and PIN supplied to you by Barclaycard. Tap Manage Terminals.

5. Tap the Add icon to add your terminal.

6. Give this terminal an identifying name. Enter the IP you reserved on your AmpliFi router. Tap Test Terminal Connection to ensure TouchBistro can communicate with your V200c device.

7. Tap Done.

8. Tap your terminal name to ensure it has a Checkmark . This indicates this is the default payment device.

9. Tap Done.

10. Tap Done.

Chapter 5. Processing a Transaction

1. To process a payment, tap Credit to process a payment with the V200c device set to default or tap Checkout for additional options.

2. Tap Payment Terminal or tap the Information to access additional terminals you may have set up.

3. Tap Pay in Full or enter a lesser amount and tap Charge if you only want to pay a portion of the bill with the offered card.

4. TouchBistro will connect with the V200c.

5. The V200c prompts if you want to add a gratuity. Press the green OK button on the PINpad if you want to add a gratuity or press the red Cancel button on the PINpad to proceed without adding a gratuity. (This screen will time out and assume you’re not adding a gratuity if no choice is made after a number of seconds.)

Note: If you do not see a gratuity prompt, please contact Verifone support to have this enabled. Likewise, if you want to disable the tip prompt, contact your Verifone support to have this disabled.

6. If you selected to add a gratuity, enter the amount and press the green OK button.

7. Insert, swipe, or tap the card when prompted.

8. The transaction gets approved and a credit card receipt is printed. Depending on card type, the customer may have to sign the receipt. Press the green OK button.

9. Return to TouchBistro. You can print an itemized guest check and close the bill or simply close the bill without printing the itemized guest check.

Section 1. Processing a Card Not Present Transaction

If you need to take a credit card order over the phone (for example, for a delivery/takeout order), you can use the Manual Entry option.

1. To process a card no present payment, tap Credit to process a payment with the V200c device set to default or tap Checkout for additional options.

2. Tap Manual Entry or tap the Information to access additional terminals you may have set up.

3. Tap Pay in Full or enter a lesser amount and tap Charge if you only want to pay a portion of the bill with the offered card.

4. TouchBistro will connect with the V200c.

5. Input the card number. Press the green OK button.

6. Input the card’s expiry date in the form of mm/yy. Press the green OK button.

7. Input the three/four digit CSC on the back of the card. Press the green OK button.

8. Input the street number portion of the customer’s address. For example if the address is 201 Hill St, enter 201. Press the green OK button.

9. Enter the number portion of the postal code. For example if the postal code is W1D 7ES, enter 17. Press the green OK button.

10. The transaction gets approved and a credit card receipt is printed. Depending on card type, the customer may have to sign the receipt. PPress the green OK button.

11. Return to TouchBistro. You can print an itemized guest check and close the bill or simply close the bill without printing the itemized guest check.

Chapter 6. Performing a Refund

Section 1. Current Day

1. Tap Orders.

2. Tap the Closed Bills tab and tap the bill you wish to refund.

3. Tap More and tap Refund Sale.

4. Tap Full Refund.

5. Tap Payment Terminal Refund.

6. On the V200c device, follow the on-screen prompts. Insert or swipe the original card.

7. The V200c will print a refund confirmation.

8. Press the green OK button.

9. On TouchBistro, tap Close Table.

10. TouchBistro moves the negative return invoice to the Closed Bills screen. The negative return invoice balances out sales for the day.

Section 2. Performing a Refund for a Bill from a Previous Day

If you need to refund a bill from a previous day, it will no longer be found under the Closed Bills tab. Use the Bill / Guest Check History option.

1. Tap Admin | Bill / Guest Check History.

2. Use the date/time wheels to set a search range based on the date/time the bill was paid. Tap Refresh.

3. Locate the bill in the search results and tap it.

4. Tap on the bill preview and tap Refund Sale.

5. Tap Full Refund.

6. Tap Payment Terminal Refund.

7. On the V200c device, follow the on-screen prompts. Insert or swipe the original card.

8. The V200c will print a refund confirmation.

9. Press the green OK button.

10. On TouchBistro, tap Close Table.

11. TouchBistro moves the negative return invoice to the Closed Bills screen. The negative return invoice balances out sales for the day.

Section 3. Performing a Card Not Present Refund

If you need to refund a bill and the customer can not be present with his/her card, you can use the Manual Entry Refund option. Follow the steps for either refunding a current day or previous day bill.

When you access the negative balance refund invoice, tap Manual Entry Refund.

Your V200c device will enter manual entry refund mode. Enter the card number and the expiry date into the V200c and follow the onscreen instructions.

Chapter 7. Batch

The batch will automatically be uplaoded at 2:58 AM (GMT).

 

See Also

Troubleshooting